Setting up a Brick Paver Walkway or Concrete Masonry Bricks

The use of Installing a Brick Paver Walkway or Aac Bricks or Pavers to develop a pathway or patio complements a house in a method that is unrivaled. It adds a level of quality and elegance to a house entrance that can not be achieved with either concrete or asphalt. Brick and Pavers likewise are available in various colors and shapes permitting distinct color design and patterns to be accomplished. In addition, setting up a Brick or Paver pathway does not always require a pro. With some basic knowledge and a relatively easy pathway plan, a property owner is capable of undertaking such a task.

The key to installing a Brick or Paver Walkway is to first appropriately prepare the area where the bricks/pavers are to be set up. The location must be dug out a minimum of a foot down, getting rid of all topsoil and clay soil. In addition, string lines ought to be strung on each side of the sidewalk. The string lines suggest the finished height of the pathway.
When the location has been dug down, 3/4" gravel stone need to be laid in and tamped down firmly. The height in between the tamped down sand and the stringline need to equal the density of the brick or paver.

Now that you have a steady base, place a 1" pipe or ledger board the length of the sidewalk on either side of the sidewalk. Utilizing a flatedge, e.g. a 2"x4" board, slide it over the two lengths of the pipe/ledger board. In doing this you will produce a level area to lay the bricks/pavers.

Now put on the level sand/stone dust strips of plastic brick borders. Set up a run on both sides of the prepared location. These strips will function as your sidewalk border and help to keep the stability and shape of the walkway. You can get these plastic strip borders at the majority of house improvement shops. The strips should be anchored down with 12" galvinized nails. You must sink these nails into the ground and through the strips every foot.

As soon as this is done, you can then begin to lay the bricks/pavers. There are many patterns you can lay. I especially like the Herring Bone pattern. The key to laying the bricks/pavers is to guarantee that they interlock with each other. Constantly stagger nearby rows of bricks by 1/2 of a brick to interlock them. This will once again help keep the integrity of the pathway.

When building the pathway, inevitably bricks/pavers will require to be cut or split. Unless you want to buy or lease a pricey wetsaw, I would recommend purchasing an easy brick/paver splitter. It is generally a sculpt with a wide end that is the width of the bricks/pavers. To really cut/split the brick/paver, lay it in a bed of sand and location the sculpt at a 75 degree angle over the area where you desire to break the brick. Using a hammer strike the butt end of the chisel securely. You might need to do this a number of times. You may also want to flip the brick/paver check here over and strike the other side of the brick using the hammer and chisle. Within one or two strikes the brick/paver must break easily. If your sidewalk has curves you will require to buy/rent a wetsaw.

After installing the bricks, develop the outside edges with additional sand, and after that shovel in the topsoil and load down securely.
Spread stone dust over the new walkway and sweep into the fractures. Repeat this procedure a couple of times to ensure the fractures are completely filled. This will complete the interlocking of the bricks and assist to get rid of any weed growth. Simply include turf seed to the outdoors edges and you must have a stunning entrance to your house within a couple of weeks.


In addition, setting up a Brick or Paver pathway does not always require a pro. The secret to installing a Brick or Paver Walkway is to very first correctly prepare the location where the bricks/pavers are to be installed. Now that you have a steady base, place a 1" pipeline or journal board the length of the pathway on either side of the sidewalk. These strips will act as your walkway border and assistance to maintain the integrity and shape of the sidewalk. Inevitably bricks/pavers will require to be cut or divided when building the sidewalk.

Leave a Reply

Your email address will not be published. Required fields are marked *