The usage of Bricks or Pavers to create a walkway or patio area matches a house in a way that is unmatched. In addition, installing a Brick or Paver sidewalk does not always require a pro.
The key to installing a Brick or Paver Walkway is to first properly prepare the location where the bricks/pavers are to be set up. The area should be removed a minimum of a foot down, eliminating all topsoil and clay soil. In addition, string lines ought to be strung on each side of the walkway. The string lines indicate the finished height of the pathway.
When the area has actually been dug down, 3/4" gravel stone must be laid in and tamped down securely. 2" of sand, or stone dust must be spread over the gravel. Again the sand/stone dust should be tamped down. Stone dust is preferred. The height between the tamped down sand and the stringline should equate to the thickness of the brick or paver.
Now that you have a steady base, place a 1" pipe or journal board the length of the sidewalk on either side of the pathway. Then utilizing a flatedge, e.g. a 2"x4" board, slide it over the 2 lengths of the pipe/ledger board. In doing this you will create a level surface location to lay the bricks/pavers.
Now location on the level sand/stone dust strips of plastic brick borders. Install a work on both sides of the prepared area. These strips will function as your walkway border and assistance to preserve the stability and shape of the pathway. You can get these plastic strip borders at a lot of house enhancement shops. The strips should be anchored down with 12" galvinized nails. You need to sink these nails into the ground and through the strips every foot.
When this is done, you can then begin to lay the bricks/pavers. There are many patterns you can lay. I particularly like the Herring Bone pattern. The secret to laying the bricks/pavers is to guarantee that they interlock with each other. Constantly stagger nearby rows of bricks by 1/2 of a brick to interlock them. This will once again assist keep the integrity of the walkway.
Inevitably bricks/pavers will need to be cut or split when developing the walkway. To in fact cut/split the brick/paver, lay it in a bed of sand and location the sculpt at a 75 degree angle over the spot where you want to break the brick. If your walkway has curves you will need to buy/rent get more info a wetsaw.
After setting up the bricks, develop the outdoors edges with additional sand, and after that shovel in the topsoil and load down securely.
Spread stone dust over the new sidewalk and sweep into the cracks. This will complete the interlocking of the bricks and assist to get rid of any weed development.
In addition, installing a Brick or Paver walkway does not necessarily need a pro. The secret to installing a Brick or Paver Walkway is to very first effectively prepare the area where the bricks/pavers are to be set up. Now that you have a stable base, place a 1" pipe or journal board the length of the walkway on either side of the pathway. These strips will act as your walkway border and aid to keep the stability and shape of the walkway. Inevitably bricks/pavers will need to be cut or divided when building the pathway.